Visitor No.6007663 ..   
TrustPassKenplas Industry Ltd.Plastics Machinery
 

Material Drying & Loading System -- SCD Series

H.S.Code: 8419399090
Material Drying & Loading SystemSCD = (1 Hopper Dryer) + (1 Dehumidifier) + (2 Autoloaders)
  • SCD is the most suitable system for hygroscopic plastics with high moisture absorption capacity, such as PET, PC, PA, PBT.
  • 3 in 1 Design: SCD is combo with compact space-saving design consists of one hopper dryer, one dehumidifier and two autoloaders, easy to move.
  • Working Principle: One autoloader loads material into hopper dryer, after drying and dehumidifying by dehumidifier in hopper dryer, 2nd autoloader loads dried material into machine.
  • Control: Microprocessor, LED display for dehumidifying temperature setting, 99-hour timer for auto start-up, fault alarm function.
  • Heat-insulated hopper dryer with down blow design to reduce the heat loss at most.
  • Close-loop Design to avoid moisture re-absorption.
  • Pneumatic Butterfly Valve installed on hopper base to avoid material block inside conveying hose.
  • Pneumatic discharge gate for easy material change.
Technical Specification
 Model SCD- 160U/80 230U/150 300U/200 450U/300 600U/400 750U/500 900U/700 1200U/700
Hopper Volume (Kg) 100 150 200 300 400 500 600 800
Dehumidifier Capcity (m3/h) 120 120 200 200 300 300 400 500
Heater Power (KW) 6.0 6.6 12.0 15.0 18.0 19.0 20.0 24.0
Heating Blower Power (Kw) 0.75 0.75 1.9 1.9 2.6 2.6 3.75 5.6
Regenerative Power (Kw) 3.5 3.5 6.0 6.0 6.0 6.0 7.5 7.5
Regenerative Blower (Kw) 0.37 0.75 0.75 1.9
Dimension (LxWxH, cm) 113x60x115 134x75x165 158x100x192
Weight (Kg) 260 260 350 350 410 600 640 680
Dia. of Suction Tube (Inch) 1.5 1.5 1.5 1.5 1.5 1.5 2 2
Power Supply 3Ф 3Ф 3Ф 3Ф 3Ф 3Ф 3Ф 3Ф
SCD Installation Diagram

Installation Diagram of Material Drying & Loading System

 
Related Posts           Click Here to See More...
TopicsForum NamePost Time
Trouble Shooting -- Injection Molding Injection Molding (Machine) 9/16/2005 12:17:45 PM
 
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.