Visitor No.6007638 ..   
TrustPassKenplas Industry Ltd.Plastics MachineryPlastic Injection Molding Machine
 

High Speed PET Injection Molding Machine

H.S.Code: 8477101090  
Injection Machine Model HIPET-24 HIPET-32 HIPET-48 HIPET-48T HIPET-72
Inj.
Unit
Number of Screw   Single Single Single Twin Single
Screw Diameter mm 80 100 120 120 120
Screw L/D Ratio 23 25 25 25 25
Shot Volume cm3 1125 2433 3956 3956 3390
Injection Pressure Mpa 115.5 123 120.8 875 875
Injection Rate(PET) g/s 274 706 904 845 1695
Plasticizing Capacity(PET) g/s 72 136 200 200 200
Screw Speed rpm 0-100 0-95 0-80 0-80 0-75
Screw Stroke mm          
Clamp
Unit
Clamping Force KN 1800 3500 4000 4000 5000
Opening Stroke mm 480 660 710 710 100%
Min. Mold Height mm 240 300 250 250 350
Max. Mold Height mm 480 720 720 720 850
Space between Tie-bars(H*W) mm 460x620 660x660 720x860 720x860 950x900
Ejector Force KN 70 150 182 182 245
Ejector Stroke mm 150 180 200 200 200
Others Pump Power kW 30+15 55+30 45+37+15 45+37+15 55+37+30
Heating Power kW 28 46 67 67 92.1
Oil Tank Volume L 800 1500 1750 1750 1800
Machine Weight Ton 8.5 20 24 26 28
Machine Dimension m 6.65x1.3x2.0 9.8x2.2x2.35 10.2x2.3x2.4 10.2x2.3x2.4 10.8x2.4x2.4
 
Related Posts           Click Here to See More...
TopicsForum NamePost Time
5 Gallon PET Preform Injection Molding (Machine) 3/4/2015 6:01:40 PM
blow molding,injection molding PET Blow Molding (Machine) 12/29/2012 6:23:03 AM
PET Screw Design Injection Molding (Machine) 8/20/2011 8:30:52 PM
Single-stage Injection Stretch Blow Molding process condition Blow Molding (Machine) 7/9/2010 3:51:58 PM
Pet bottle manufacturing plant Blow Molding (Machine) 9/7/2009 1:25:26 AM
Trouble Shooting -- Injection Molding Injection Molding (Machine) 6/29/2006 4:13:40 AM
requiest for pc blow molding machine Blow Molding (Machine) 4/7/2006 8:00:05 PM
Bottom Bottom Bursts Easily while Dropping Blow Molding (Machine) 2/15/2006 3:52:41 PM
PET Preform Making Injection Molding (Machine) 11/10/2005 4:22:40 PM
plastic injection machinery factory Injection Molding (Machine) 6/28/2005 12:57:54 AM
New barriers & coatings Blow Molding (Machine) 6/26/2005 3:40:10 PM
Acetaldehyde Injection Molding (Machine) 6/22/2005 10:31:49 PM
Moisture absorption of PET preforms against aging Injection Molding (Machine) 6/22/2005 10:18:18 PM
 
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.