Visitor No.5929666 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Blow Molding (Machine) ==> what are the final products of blow molding process
<< Previous Topic Next Topic >>
1
Blow moulding is a process for producing hollow parts like bottles, drums, some toys and sometimes pipes.
The process is very similar to glass blowing. Semi-molten plastic is inflated inside the mould plastic.
There are loads of internet sites that show how the process works like:
http://www.pct.edu/prep/bm.htm
Good luck
Robin Enderby

Fine
Poor
10/9/2005 4:49:17 AM By Robin Enderby
I am lady stading Mechanical Engineering(Manufacturing Component) in Tswane University of Technology i'm doing (S2).My question is what are the final products of blow molding process.I will be happy if you may answer my question clearly.

Fine
Poor
9/20/2005 7:43:18 PM By funanani
what are the final products of blow molding process

Fine
1
Poor
9/14/2005 10:20:17 PM By manena gudani
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.