Visitor No.6005854 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Blow Molding (Machine) ==> blow moling process
<< Previous Topic Next Topic >>
1 2
Dear Sir/Madam,

Please could you send me the details of specifying the blow molding process as well as injection blow molding process.
many thanks.

Ramesh

Fine
4
Poor
12/2/2007 11:42:32 PM By (Anonym)
Wheather it's a hazy problem or Pearlesence?
Haziness appear due to higher temperature of preform (particular area) in the reheat blow condition while pearlesence appeared in a area of preform where it's cooler than other area of preform.
As both preforms are having same dimension whereas the bottle heigh of 500 ml is higher than 330 ml hence the NSR for 500 ml bottle is higher so adjust blowing condition accordingly.

Fine
5
Poor
3
10/5/2007 1:11:57 PM By Chandranath Dutta
Dear Sir,

I am using stretch blow molding machine,we take 330 ml 500 ml and 1.5 lt production,for 330 ml we use 14.5 gram preform and for 500 ml we use 18 gram preform but the dimensions of preform same both 330 and 500 ml.The height of 330 ml bottle is 160 mm and the height of 500 ml bottles ids 220 mm,i am getting perfect 330 ml bottle but not getting good bottle of 500 ml,after blown milk haze appaier on the bottles.please advise me the correct heating setting

Fine
7
Poor
2
10/4/2007 12:35:10 AM By Ananth
i have a problem with the expansion of the bottle and perhaps CO2 missing how can i do to mantain the CO2 value for more time, we have a resin higer than .8 dl/g, blowing temp 106, pressure 14 and 38 bar

regards
danny
pd: if you can response to my e-mail will be greatfull thanks again
danny_ruiz@hotmail.com

Fine
4
Poor
2
3/25/2007 2:53:07 PM By danny
Dear
Sir/Madam

can you send me the details of specifying the blow moulding process as well as injection moulding machine.

best Regards
c.r.venkatesh

Fine
2
Poor
5
2/24/2007 6:24:10 PM By venkatesh
Dear
Sir/Madam

can you send me the details of specifying the blow moulding process as well as injection moulding machine.

best Regards

Fine
1
Poor
6
2/24/2007 6:23:48 PM By venkatesh
Every preform has been designed for a specific bottle , though 10% allowances in either height , volume or diameter is possible.So to get a good quality bottles four (4)things are important basically which affects the natural stretch ratio(NSR).
First the I.V of the preform, Second the blow temperature, Third the copolymer level of the PET resin and fourth is the moisture level of the preform(Aging).

Fine
4
Poor
4
12/30/2006 8:15:39 PM By Chandranath Dutta
please send me the relation betwwen the dimension of preform and maxmum dimension of the bottle can be blowing with good quality and what parameters affect this process

Fine
2
Poor
3
8/23/2006 9:30:03 PM By mohamed
Dear
Sir/Madam

can u send me the details of specifying the blow moulding process as well as injection moulding machine.

Regards,

induni gunawardana

Fine
16
Poor
4
7/4/2006 2:33:07 PM By induni
please send me the process preform by the blow molding and injection malding machine.

Fine
8
Poor
2
6/26/2006 2:58:59 PM By rizwan
Can you Explain or give reference of the book which explains the design cosideration while designing the tool for assemetric shape HDPE bottles.This is to minimise the number of trials after tool making to get the required minimum wall thickness all over.

Fine
2
Poor
6
10/29/2005 1:06:09 PM By srchikane
i want to know the process of pet blow moulding.

Fine
5
Poor
1
10/19/2005 2:57:28 PM By prasad
Blow molding process nothing but making containers by heated blown articles either from preform or parision.

Fine
3
Poor
4
10/16/2005 7:34:42 PM By sundharlal
Dear
Sir/Madam

can you send me the details of specifying the blow moulding process as well as injection moulding machine.

best Regards
hadi khodaverdiyan

Fine
3
Poor
2
10/16/2005 5:12:31 PM By hadi
i cant find a book by Rosato 'blow molding handbook' ISBN 3-446-22017-8 publish by Hanser as well as on website also there is a language problem for me(its in german on website so i cant understand)

Fine
7
Poor
2
9/20/2005 5:20:40 PM By dhaval
sir i m a final yr mechanical student. we r making project on blow moulding process. pls tell us the various books abnailable for this.

Fine
7
Poor
3
9/10/2005 1:25:14 PM By gorav
WHAT CAN BE USED AS INTRODUCTION AND LITERATURE REVIEW IN A PROJECT TOPIC.EXTRUSION BLOW MOULDING MACHINE FOR PET BOTTLE.


Fine
Poor
2
9/10/2005 7:30:07 AM By hector
you can buy this book by Rosato 'blow molding handbook' ISBN 3-446-22017-8 publish by Hanser ( www.hanser.de )

Fine
3
Poor
2
9/5/2005 3:53:02 PM By leong
Dear
Sir/Madam

can u send me the details of specifying the blow moulding process as well as injection moulding machine.

Regards,

Dhaval Shah

Fine
11
Poor
6
8/27/2005 12:24:34 PM By dhaval
Haha, this topic needs a big book to explain. Anybody is interesting to answer it?

Please list your specific problem here, not a general topic.

Fine
18
Poor
7
8/3/2005 10:05:48 PM By Kenplas
1 2
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.