Visitor No.5644071 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Used Machinery & Mold ==> injection molding and mold 5 and 6 gal. preform
<< Previous Topic Next Topic >>
1
INJECTION MOLDING AND MOLD 5-6 GALLON

Fine
4
Poor
3
4/4/2008 2:17:47 AM By Mohammad Yaqub
we would like to buy single stage machine like aoki or nessi for producing from 500 ml to 5 litres. Is suitable machine is available please let me know. we are from simba plastics, tanzania. www.sumariagroup.com

Fine
5
Poor
3
3/19/2007 9:23:43 PM By masan
we are company in syria labiba for plastic
my name rateb al homsi
Im looking for preform injection mould
12 cavity mould from 22 gr. up to 56 gr
please send for me photo for the mould withe price

Fine
2
Poor
1
12/5/2006 5:57:20 PM By rateb al homsi
We want to buy 1 set used 5 Gallon PET bottle stertch blow molding machine including blowing m/c, preform heater, air compressure, air filter & bottle moulds (complete set).

If you hv such m/c pls give us very workable price CFR Chittagong by sea including start-up the m/c by yr engineer / expert.

Fine
2
Poor
1
6/11/2006 10:25:26 PM By Asad
Dears.
we are company BAS Tuti Fruti from Skopje Macedonia which produce Pet Preforms and Blowing bottles
our interes is for 32 cavity husky mould from 21 gr. up to 28 gr. BPF and PCO
thanks in advance and waiting on your soonest reply
Very Best Regards
Fadil Morian

Fine
1
Poor
4/4/2006 5:17:38 PM By fadil
we have to bue used mould for pharma packaging child resistant cap with pilfer seal

Fine
1
Poor
1
3/25/2006 3:25:37 PM By SIKANDER ILYAS
sr martin con la precente me con plaso en saludarle qui ciera in formacion sobre su maquina se puede comunicar a mexico a tel 01152 469 6921790 gracias

Fine
Poor
1/21/2006 6:20:23 PM By ADAN LOPEZ
I have a machine HUSKY XL225 year 1990 for sale. Because I close activity I will sell it for cheap price.
MARTIN

Fine
6
Poor
4
11/4/2005 11:53:23 PM By martin
I'm locking for used inyection molding machine and 5 6 gal.preform mold

Fine
25
Poor
1
7/11/2005 5:26:34 AM By angel heredia
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.