Visitor No.5843033 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Injection Molding (Machine) ==> PET Preform Making
<< Previous Topic Next Topic >>
1 2
Hi
Iam looking for this preform neck
Please find this bottle and this neck for half letter 500 ml
Regards
Abbas

Fine
1
Poor
10/30/2013 4:15:40 AM By abbas
Hi
I am interested in setting up a PET preform manufacturing unit.
Could you let me know where I can get the project details including machinery price, frieght, consumables, power etc.
Thanks & Regards
Asit Kumar Das
9774683168

Fine
2
Poor
8/7/2013 5:40:04 PM By asit kumar das
Sir,
I would like to start a PET PREFORM manufacturing unit to supply preform
to pet bottle manufacturers. So kindly guide me with the detailed project report of it.
Thanking you.

Fine
8
Poor
12/30/2012 2:25:14 PM By arulselvan
Sir
I would like to know about preform injector machine for one liter.
so what is the price can u send me details thanks

Fine
3
Poor
1
12/13/2010 4:27:57 PM By Nilesh
Hi
I want to know about PET preform machine .
Capasity: 2500 Preform /minute
can you please send some more technical information and how to use
send also proforma for one machine.

Thanks in advance

Fine
10
Poor
2
11/30/2010 2:11:57 PM By Hassanpour
To who it may concern

I am currently looking for a injection machine for 5 gallon bottle water 680 grm to 720 grm. Also that would produce 80 to 100 preforms per hour. I am trying to get the venture off the ground if you have a used one please advice as well.

Many Thanks look forward to hear from you.

N LOKESH

Fine
9

Fine
2
Poor
1
11/7/2010 2:08:01 PM By lokesh n
SIR

we want to know about the condition of 5 gallon preform process
which will make the finish 5 gallon preform 680 g transparency
with use the pet material iv around 0.85 - 0.86

Fine
5
Poor
1
9/14/2010 10:19:53 AM By thiphakone
sir,
we want to buy a dehumidifier for drying pet flakes to manufacture pet strap . please tell me which is good for us. my machine capacity is 300kg/hr.having min. -40 dew point.

Fine
6
Poor
1
4/13/2010 6:06:45 PM By partha sarathi mohalik
Hi

I am interested in setting up a PET preform manufacturing unit.
Could you let me know where I can get the project details including machinery price, frieght, consumables, power etc.

Thanks & Regards..Pat

Fine
11
Poor
2
4/13/2010 3:51:45 PM By Pat B
Dear sir,
please help us in PET PREFORM Project . Kindly submit all details of this project.

Fine
6
Poor
1
12/25/2009 3:12:40 PM By praveen
ear sir,
we like to establish PET PREFORM (for end use of drinking water /beverges bottle blowing )Manufacturing small scale indutries to india .for the reson if you can ,pl.provide us a complete project detail with price,freight,power ,manpower,raw material,spare &consumable etc.

waiting for reply ASAP
akash
india

Fine
8
Poor
6
9/20/2009 9:08:57 AM By akash
Dear sir,
please help us in PET PREFORM Project . Kindly submit all details of this project.

Fine
5
Poor
2
9/3/2009 9:41:57 PM By PAWAR RAMDAS
Dear sir,
we like to establish PET PREFORM (for end use of drinking water /beverges bottle blowing )Manufacturing small scale indutries to india .for the reson if you can ,pl.provide us a complete project detail with price,freight,power ,manpower,raw material,spare &consumable etc.

waiting for reply ASAP

narendra patel
for aquaion technology inc
india

Fine
17
Poor
3
10/22/2008 7:14:38 PM By narendra patel
What is the problem?
The preforms get stuck in do the mould fingers?

Fine
6
Poor
1
10/7/2008 5:40:34 PM By Leho
Dear Sir,

i want to ask about the parameters in choosing the right injection machine

thank you

Fine
9
Poor
8/22/2008 9:48:59 AM By wahyu
Drying time = hopper capacity (in kgs) / average injected weight (kgs/hour)

Fine
7
Poor
5
11/3/2007 12:01:44 PM By (Anonym)
hi,
i want to calculate the drying time for pet resin before it reaches the IMM.
please tell me the mathematical equations used for this purpose or any reading material to learn to do this task.

pakistan

Fine
13
Poor
7
11/3/2007 11:36:17 AM By ali
Dear sir,
please I want the design of 12 cavities pet mold drawn by I-DEAS cad cam program.

Fine
7
Poor
9
10/23/2007 3:58:07 PM By miko
The causes of taste /odor in drinking bottled water made of PET is due to AA (acetaldehyde).Normally certain amount(very less) of AA remains in PET resin itself which is termed as 'residual AA' but AA is generated in Injection Molding process. AA is normally a gas whose B.P is 21 degree C. This confined AA in PET bottle wall migrates and impart taste in water.
So be careful in Injection molding process.

Fine
5
Poor
1
10/11/2007 12:56:39 PM By Chandranath Dutta
what is the possible cause of plastic like taste / odor in bottled water? is AA can affect the plastic like taste / odor in bottled water?

Fine
5
Poor
4
10/10/2007 9:12:20 PM By Cesario H. Casalla
1 2
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.