Visitor No.5929622 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Injection Molding (Machine) ==> Injection Moulding
<< Previous Topic Next Topic >>
1
WE have 3 -16 cav moulds ea .for spoon , Fork and Knife . The wall thickness in the handle area is 10 mm . All valve gate ( Husky ) and gates are 2.5 mm. We are not able to eliminate flow marks on the part . ( Near the gate , opposite to the gate ) . Can I have expert opinion as to the possible solution to this . Thanks - Mike

Fine
1
Poor
2/11/2015 2:11:48 AM By mike sanghvi
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.