Visitor No.6315305 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Injection Molding (Machine) ==> Milky at gate of preform
<< Previous Topic Next Topic >>
1
check the holding time, the holding time to much

Fine
5
Poor
1
4/25/2012 12:43:41 AM By farooq
i have the same problem with my preform mold at the bottom part of the tube start to have a little haze and sprue being milky i don't know what to do ?

Fine
3
Poor
3
3/28/2012 1:11:41 AM By nedal
The rest of part clear, could have a little haze.
What is possible reason for gate/ sprue being milky?

Fine
3
Poor
10
8/5/2011 12:22:02 AM By mike
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2018 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.