Visitor No.4150344 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Blow Molding ==> Pet bottle manufacturing plant
<< Previous Topic Next Topic >>
1 2 3 4 5 6 7 8
I want to start a plastic bottles manufacturing plant please suggest me about its initial startup cost and machineary cost and investment and also its market possibility

Fine
3
Poor
2/27/2015 6:16:26 PM By ramkumar
I am going to establish a plastic production unit for the following products.
1. RPVC PIPE FITTINGS
i. For Electrical Conduit
ii. For Water Flow
2. PET PREFORM & JAR PREFORMS.
3. END CAP/CLOSURES FOR PET BOTTLES.
Subsequently I want an Injection molding machine for all the three products (single machine should perform all the above three products). Is it possible? Please reply me.

Fine
3
Poor
1
2/22/2015 1:31:09 AM By jagadeesan
I want to start a plastic bottles manufacturing plant please suggest me about its initial startup cost and machineary cost and investment and also its market possibility

Fine
Poor
2/9/2015 2:36:58 PM By vijay
I want to start a plastic bottles manufacturing plant please suggest me about its initial startup cost and machineary cost and investment and also its market possibility

Fine
1
Poor
2/5/2015 10:16:55 PM By manish kumar
can you send me an offer .. We are setting up a 2500 LPH water bottling plant in Khopoli; Maharastra..
Rgds
Manish

Fine
4
Poor
1
1/22/2015 5:29:51 PM By manish
xeKhI2 You can definitely see your enthusiasm in the work you write. The sector hopes for even more passionate writers like you who are not afraid to mention how they believe. Always go after your heart.

Fine
Poor
1/16/2015 4:45:32 AM By http://crorkz.com/
i start a pet bottal plant so how many total investment full information.

Fine
7
Poor
1/2/2015 12:50:31 AM By mohnish patel
i want to start bottle manufacturing small plant please reply me with cost of machiery.

Fine
1
Poor
2
12/26/2014 5:45:29 PM By manoj
i want to start Pet bottles manufacturing can give machine required to initial capital cost

Fine
2
Poor
12/6/2014 2:30:46 PM By kargee
we are looking for a supplier, who can make and supply PET bottles from a range may be 0.5 kg to 3.5kg.
kindly send the Quotation for this whole range of products.
also pl. attach plastic wt. of each bottle
tks
sundaresan
8939174356
sundaresan@dotsun.net.in

Fine
Poor
11/29/2014 11:10:48 PM By sundaresan
Bisalary water bottle mfg. plant quotation

Fine
3
Poor
2
11/25/2014 12:24:59 PM By hindurao salunkhe
I am a producer of Packaged drinking water.I am sourcing the bottles locally.but the bottles are no shiny like other brands.why it so.Can any body tell.

Fine
Poor
11/24/2014 5:16:08 PM By d srinivasa rao
pls send machine details
thanks
ayub

Fine
Poor
11/14/2014 8:46:31 PM By t s ayub
Hi I am Thilak.I start new pet bottle plant in chennai.In my company manufacure 300ml,500ml,1l,2l. I need market price of the pet bottle.This is my number.9444999640

Fine
Poor
11/14/2014 4:45:46 PM By thilak
Dear sir,hum 30,60,100,200ml ki pet bottal ki manufacturing plants lagane ke liye sari jankari chahte hai.please Hume sari jankari dene ki krapa Kate.mobile le no.+919997284669

Fine
4
Poor
10/26/2014 10:38:52 PM By gaurav varshney
i am started a plstic bottle plant size of bottle is 500ml,1000ml, n 2000ml plz suggested me,

Fine
1
Poor
10/21/2014 2:34:15 PM By nirdesh tyagi
I am going to start the pet bottle manufacturing unit (fully atomatic) in Tamilnadu, India. Can any one give me the detail of plant cost, if I aim for 2 lakhs per month.

Fine
3
Poor
2
9/27/2014 2:52:10 PM By js raveendaran
dMEVg4 Well I really enjoyed studying it. This article offered by you is very useful for proper planning.

Fine
2
Poor
9/25/2014 3:40:04 AM By http://crorkz.com/
Please send the Project report & INVESTMENT cost of Pet plastic bottle manufacturing unit size 500 ml, 1000 ml, 2000 ml & plastic jar also.

Fine
2
Poor
1
9/23/2014 2:45:22 PM By gopi
Please send the Project report & Investment cost of Pet plastic bottle manufacturing unit size 500 ml, 1000 ml, 2000 ml & plastic jar also.

Fine
2
Poor
3
9/6/2014 3:01:06 PM By siraj maja
1 2 3 4 5 6 7 8
 
 

Post A Reply

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2015 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.