Visitor No.5929620 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Resin & Additives ==> What is PETG?
<< Previous Topic Next Topic >>
1
I agree! Also, using recycling coatrinens with clearly marked openings can really help increase participation and reduce contamination.Keep spreading the word and we'll increase the number of recycled pop bottles from 27% in no time!!

Fine
1
Poor
12/25/2015 12:42:34 PM By mcjhun
qscukwoe
a4kv9cb5
http://en.wikipedia.org/wiki/Insurance - insurance
uk60we69
c41i5ka4

Fine
Poor
11/16/2015 4:31:30 PM By jibjabst
n2asr3v2
qwxr84dw
http://en.wikipedia.org/wiki/Insurance - insurance
cud8y9cl
pxx4ptdi

Fine
Poor
11/12/2015 8:11:28 PM By jibjabst
dear, can we use the white preform( re - cycle) in injection moulding
thanks

Fine
Poor
1
3/19/2013 8:25:57 PM By rajeet bansal
We are APET/PETG/PS sheet producer, if you have interest of any product please drop us mail.

mpfprod@mayplastics.com

Fine
3
Poor
1
11/16/2010 2:46:07 PM By MPF
When using this in packaging can I use the resin code #1 with PETG underneath the icon?

Fine
Poor
4/22/2008 3:40:10 AM By Stacie
PETG (polyeylene terephthalate cyclohexanedimethanol), also known as glycolised polyester, is used in the production of cards. The "G" represents glycol modifiers, which are incorporated to minimize brittleness and premature aging that occur if unmodified amorphous polyethylene terephthalate (APET) is used in the production of cards.
PETG films are amorphous, meaning the polymer molecules are not aligned or ordered within the material. It is produced in a roll calendering process similar to that used to make standard PVC. As a result, PETG has many features similar to PVC with similar temperature resistance and durability. In Europe, PETG has found a market where customers are looking to produce "environmentally" friendly cards. In addition to its use in cards, this polymer is used in applications where thermoformability is required.

Fine
12
Poor
2
6/27/2005 9:15:52 PM By Kenplas
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.