Visitor No.6622351 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Blow Molding (Machine) ==> Bottle get stuck on the bottom of the mould
<< Previous Topic Next Topic >>
1
To paraphrase, how do you do a search for information sites that fit what I want to check out? Does any body have learned how to BROWSE through blogs and forums by content or anything that on blog writer? . ebbkdbfgfgbd

Fine
Poor
11/11/2016 11:45:44 PM By johnd686
Thank you for the good writeup. It in fact was a amusement account it. Look advanced to far added agreeable from you! By the way, how can we communicate? kdbegagcddfk

Fine
Poor
11/11/2016 11:45:36 PM By johne164
Spot on with this writeup, I actually believe this website needs a great deal more attention. Ill probably be returning to read through more, thanks for the info! cdeadcdkkcec

Fine
Poor
8/20/2016 1:46:23 AM By johne645
Several of these games are worth some time and are actually gdbadddecdbb

Fine
Poor
8/20/2016 1:46:17 AM By johnf832
Resp. Sir
I Have a blow m/c maked Global.All settings are adjusted for 250 ml soda grade bottle but bottom of the bottle not blowing well.Please kindly send
me the all settings to my mail id
Thank You

Fine
Poor
11/22/2014 4:42:47 PM By yogesh patil
It could be a cooling problem. There may be a small hole in the bottom base mold. Try cleaning it out with a precision drill bit or paperclip.

Fine
2
Poor
12/22/2013 11:08:33 PM By dustin
hello sir, i want pdf file of soulve problem in pet bottles. (in pet blowmoulding machine). pls. sir i m waiting your pdf file pls. sir. thank u very much-DIPAK.

Fine
Poor
8/27/2013 9:26:39 PM By dipak
you all having problems of proper heating -1.what is the length of your bottles preforms as per your bottles size you have manage the avobe two heater temp. and bleow two heater temp.adjust the both temp. I thing you will get the regult the best. thanks-Inayat

Fine
2
Poor
5/24/2013 9:10:25 PM By inayat hussaingermanwala
for un blown neck and bottom if u r using a 2 stage then it must be ur wrong settings with heaters.

for bottle struk on the bottom mould it should be the cooling problem provide coolong at the bottom mouls or increase ur blow air decompression time

Fine
3
Poor
6/26/2012 7:47:02 PM By shakthi
hi sir
i have a blow machine model: pet 2214. all settings are adjested for 450 ml bottle. bt neck and bottom of the bottle not blowing well. plz kindly send the all display settings to my mail id plz sir thnk Q.


thanx, leonard

Fine
Poor
3
3/20/2012 10:36:39 AM By leonard hurd
hi sir
i have a blow machine model: pet 2214. all settings are adjested for 450 ml bottle. bt neck and bottom of the bottle not blowing well. plz kindly send the all display settings to my mail id plz sir thnk Q.


thanx:
leonard

Fine
Poor
1
3/16/2012 12:29:49 PM By leonard hurd
hi sir
i have a blow machine model: pet 2214. all settings are adjested for 450 ml bottle. bt neck and bottom of the bottle not blowing well. plz kindly send the all display settings to my mail id plz sir thnk Q.


from : MAHEE. mail id : stillalone.mahi@gmail.com

Fine
4
Poor
10/14/2011 10:07:59 PM By mahesh
700ml bottles get stuck on the bottom of the mould, I don't know what is the problem, if any one have this problem before please send me a comment

Thank you in advanced for your cooperation

Pedro
pedjmz@gmail.com

Fine
21
Poor
1
7/13/2009 1:49:30 AM By Pedro
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2019 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.