Visitor No.6005888 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Injection Molding (Machine) ==> 5 Gallon PET Preform
<< Previous Topic Next Topic >>
1
WE CAN SUPPLY 5 GALLON PET PREFORM, 5 GALLON BLOW MOULDING MACHINE, 5 GALLON PET PREFORM MOULD FROM 2 TO 8 CAVITY, INJECTION MOULDING MACHINE.
CONTATCT US ON mdpetcontainers@gmail.com
+91-9227711249
WHATSAPP@+919227711249

Fine
Poor
3/4/2015 6:01:40 PM By haresh limbani
I need quotation for preform 5 Gallon PET Ocean Blue, with same quantity of caps for 1x20'.
Regards,
Rafael Martins

Fine
Poor
12/19/2014 5:19:31 PM By rafael martins
is it available to produce 5 gallon water bottle with handle?

Fine
1
Poor
1
3/16/2012 4:19:31 PM By afshin
Hi,

can you suggest in the pet recycling How to make the pet resin form,you please suggest if any technology is availablity.

thanks and regards,

Irshad

Fine
3
Poor
1/20/2011 9:12:22 PM By Irshad


Dear Sir,



We would like to introduce ourselves as registered supplier/indenter of various types of machinery/tools/Raw Material/electronics items with many of government and private sector organizations in our territory. One of our customers would like to purchase below mentioned items on urgent basis
Sr. # SPECIFICATIONS Unit Qty
1 Pet Preforms for 19 litre portable water bottles
As per attached sheet specifications. Nos. 10,000



You are requested to please send us the literature along with your offer on FOB/C&F Basis for submission to the customer. Your FOB prices should be inclusive of our 15% commission, which should only be indicated in your covering letter to us. You requested to please reply through return mail.

We are anxiously waiting for the reply.
Thanking you in anticipation.
Best regards
Mobeen Ashraf
Manager
International Purchase Department
Nazir & Sons International

2ndFloor, PrachaPlaza, Near Municipal Committee Office, Faisal Shaheed Road, Taxila, Pakistan
Ph No: 0092-51-4547995
Fax No: 0092-51-4547997
E-mail: nazirsonpvt@hotmail.com




Fine
2
Poor
2
11/7/2009 3:02:34 PM By MOBEEN ASHRAF
We are looking for used Pet Blowing machine 5 gallon for minral water,please send price
Thanks
Karachi-Pakistan

Fine
2
Poor
1
6/14/2009 2:57:22 PM By MOHAMMAD YAQUB
Nov. 7, 2006

Dear Sir,

Is it possible to mix PET resins for 5 gallons High IV and General Purpose PET Resin for small Bottles? What will be the result of this mixture?
Will it result in a material that will give a lower IV than that of 5 Gallon Material?
Purpose is to lower cost, by using 50% Virgin 5 Gallon PET Resins and Recycled Mineral Bottle PET Resins?
Is this possible?

Thanks,

Edison Cheng

Fine
11
Poor
11/7/2006 12:36:56 PM By Edison Cheng
hi dear we need some 5galons for our water supply business.
19 liter pc 5galon in recycler material with cap
plz send us C.I.F.value at karachi sea port pakistan delivery
show us ur latest designs with reasonable price

Fine
4
Poor
2
10/18/2006 5:11:41 AM By farrukh
i am a manufacture of pet plastic product in gujranwalacc(pakistan) which the name of company Friends Plastic Enterprise (FPE) so i would palne to produce five liter water bottle also. so i requested you to send me total description of finished 5 litter bottle e.i length, weight, and neck pco etc.

Fine
2
Poor
5
6/26/2006 2:54:55 PM By rizwan
i need the pet preform weight 850 gram for making 5 gallon bottles.
Azeem

Fine
8
Poor
1
4/20/2006 6:35:04 PM By azeem shaukat
pet preform muth48 80,82,85grams for soft weter

Fine
3
Poor
4/5/2006 3:17:34 AM By lutfi
Using long preform we can see that we have a radial stretch of 5,8 and this is the limit before having over stretch, yield phenomena on the material. Talking about the axial stretch 1,5 is too low for use in the better way the PET properties when bi-oriented. The total stretch is 8,7 that is on the border line for 5 gallons application. In fact, we have a low distribution factor.

With the new design we can see a completely different situation:

We have an acceptable radial stretch, 5, that allows a good control of the thickness distribution and guarantee no yield phenomena. Also the axial stretch is good: 1,8 guarantee less presence of amorphous phase and also a better raw material bi orientation. In this case we register a medium/high distribution factor. In fact, the total stretch is 8, lower respect to the value obtained in the standard 5 gal design. according to our experience, is a good value.

Fine
13
Poor
1
6/26/2005 8:32:11 PM By Kenplas
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.