Visitor No.6274743 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Machine Trouble Shooting ==> screw rotates while injection
<< Previous Topic Next Topic >>
1
If rotation direction same as CHARGE, there may be leakage inside CHARGE valve;
Otherwise, check ring of screw is worn out, or leakage inside hydraulic motor.

Fine
3
Poor
11/4/2008 12:47:59 PM By Kenplas
screw rotates at the time of injection could any suggest me what could be the problem ? we replaced nrv (non return valve) but still the problem exists

Fine
Poor
11/4/2008 12:15:43 PM By srinivas
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2018 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.