Visitor No.6534595 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Machine Trouble Shooting ==> YUKEN electro-hydraulic flow control valve does not work well (A63 Computer)
<< Previous Topic Next Topic >>
1
imx2trns
q4mts1qg
insurance
symz205x
t0lzmacr

Fine
Poor
6/16/2015 11:27:14 PM By lazyzazy
ivksg16y
lh6nsutv
insurance
ueu40e90
srdwq4qq

Fine
Poor
6/16/2015 7:41:40 AM By lazyzazy
1. Power on machine, but don't power on motor;
2. press [I/O] and switch to [D/A] window (as enclosed);
3. Input 140 to "press1", and 99 to "Speed", the output of two ampere meters should be 0.8A and 0.6A accordingly;
4. Input 05 to "press1", and 05 to "Speed", the output of two ampere meters should be 0.05A and 0.2A accordingly;
5. Keep barrel empty (no material inside) and perform "charge" (set pressure 50 and speed 05), the screw should start rotating;
6. increase the "charge" speed setting, the rotation speed of screw should be more and more accordingly; otherwise, clean YUKEN proportional valve (mainly the valve core is blocked).

Fine
3
Poor
1
9/16/2008 10:18:14 AM By Kenplas
Also it seems that one YUKEN electro-hydraulic flow control valve does not work well. We assume that because the speed of the machine is not stable and also does not follow the set parameters we put. The part number of the valve is: efbg-03-125-c-1720, MFG No: MY9711 02 Japan. Please inform about spare part or other action we should do.

Fine
Poor
9/16/2008 10:16:22 AM By Drama
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2018 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.