Visitor No.6274736 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Machine Trouble Shooting ==> Manifold Temperature Fluctuation (Preform Mold, 4 Cavity, 5 Gallon)
<< Previous Topic Next Topic >>
1
Possible reasons:
1. Loose connection of thermocouple. Fix it firmly and try again.
2. Replace thermocouple or PID temperature controller.

Fine
1
Poor
1
4/8/2008 7:55:57 PM By Kenplas
In the Temperature Display of Mold Temperature Controller we have seed 20 C Degree up and down values from the set temperature. As you know this temperature values are going up and down only +/- 1 C from the set temperature normally.

Fine
Poor
4/8/2008 7:53:14 PM By Fikret
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2018 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.