Visitor No.6005897 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Recycle ==> buy pet-pp recycle system
<< Previous Topic Next Topic >>
1
We are looking for Recycling Plant for PET and PE.

Kindly send us details for both types of Plants i.e. Post Consumer and Pre Consumer Material Recycling.

Best regards,
Humayun Naseem
humayun@asiagroup.org

Fine
3
Poor
12/3/2010 6:49:14 PM By Humayun Naseem
We are interested in PET Recycling line to produce PET Multifilament Yarns and monofilaments.Mail complete details for minimum feasible capacity compact plant.

Fine
4
Poor
6/16/2010 10:10:51 PM By Avinash Prabhakar
Dear Mr Singh,

Please send me an email with your contact details to our works email address sales@awcengineering.co.uk and I will reply with details of our plastic recycling & washing plants.

Best regards,

John Dakin
AWC Engineering Ltd.

Fine
Poor
5/28/2010 4:47:59 PM By John Dakin
I am interesting in recycling plastic bottles (water and soft drink) i am looking for a machine to perform this task, i am also looking to sell the recycling bottles. Please send any information you may have thanks

Fine
Poor
5/28/2010 9:58:57 AM By Sanjay Singh
pet-pp recycle system

Fine
2
Poor
4/11/2010 3:43:08 PM By vijaykumar
We have one excellent, complete PE + PET bottle-recycling-line for sale.
pregrinding-washing-separating-grinding-drying.
capacity approx. 2000 kg/h.

Fine
5
Poor
1
4/1/2010 8:31:21 PM By Remax - Klaus Schoeffler
Hello There,
I am looking for Pet bottles for recycling if you have please send me the details at hussain712@gmail.com or contact me at 07912933990.

Regards,
Syed Hussaini

Fine
1
Poor
12/31/2009 10:59:08 PM By syed
Our company, AWC Engineering Ltd supply high quality, cost effective solutions to the recycling industry worldwide. This includes the supply of shredders (single, twin & quad shaft), granulators, crushers, balers and complete recycling plants for plastics (PP, PET, PE, PVC etc.), Rubber (Tyres, Production Waste etc.) and Metals (WEEE, Cars etc). For further information please contact me sales@awcengineering.co.uk

I look forward to hearing from you.

Best regards,


John Dakin
Sales Manager
AWC Engineering Ltd.

Fine
1
Poor
1
11/10/2009 6:49:24 PM By John Dakin
Hello,

I am looking for a used / nearly new shedder with the following specs

Chamber sizes of 21 in. x 29 in.{540 mm x 740 mm} to 64 in. x 40 in.{1620 mm x 1020 mm}

Drum-style closed rotor design
Batch feed standard, meter feed available
Maximum throughput of 3,300 lbs/hr {1,500 kg/hr}

For large purgings, high-volume defects, sprues, bulky bottles or containers and extruded profiles and pipes

Thanks

Fine
1
Poor
11/10/2009 4:38:58 PM By Alan
We are looking for PET recycled yarn for manufacturing clothes. Please send information on these regards

Fine
2
Poor
1
2/2/2009 9:22:04 AM By ARMANDO DIAZ
Hi Warren,

I'm sure we can supply a machine or system to suit your requirements. Can you tell me what size the feed material is? I presume it has been melted to remove the silver and is in a lump form? If you would like to send us a sample we will run some trials for you. Our office address is 3 Hillcrest Rd, Offerton, Stockport, Cheshire, UK, SK2 5QJ.

I look forward to hearing from you soon.

Best regards,

John
Tel: 07746201534
Email: awceng@btconnect.com
Web: www.awcengineering.co.uk

Fine
2
Poor
6/19/2008 2:45:27 AM By John Dakin
I produce around 50 tons (kg) of PET waste from recycled x-rays that have had the Ag removed from them. It is my intention to recycle this PET into pellets or strapping.

regards


warren richards

Fine
2
Poor
6/19/2008 12:55:05 AM By WARREN
We can supply this type of equipment please send us a detailed enquiry to awceng@btconnect.com

Fine
2
Poor
2/26/2008 2:45:06 AM By John Dakin
we need it too

Fine
2
Poor
1
2/20/2008 8:05:57 PM By maxim
I am rahnama of rahnama general trading.
We need pet-pp recycle system.
Please if you have information send for me ergant.
thanks

Fine
24
Poor
5
1/25/2008 10:26:15 PM By rahnama
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.