Visitor No.5646881 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Recycle ==> PET Recycle -- Bottle to Bottle (B2B) #Part C
<< Previous Topic Next Topic >>
1
Pl tell me Wt cost to be go for entire setup.

Fine
Poor
12/16/2014 3:08:20 PM By vishal patl
i am interested in pet to flakes can any one guide me the all process of this set up.

Fine
1
Poor
1
2/24/2012 8:58:43 PM By eagle shah
Dear Sir

We are working to set-up machineries to produce compound from re-cycle pet bottle. We are looking for supplier of machineries and technology.

Please advise.

Regards

Rezual Masud
Breezecheme
25/2 Lake Circus, Kalabagan
Dhaka-1205
Bangladesh
Tel : 880-2-9123982
Fax : 880-2-9142659
Email : techno@bangla.net

Fine
5
Poor
8/27/2008 1:15:16 PM By Rezaul Masud
Continue at PET Recycle -- Bottle to Bottle (B2B) #Part D

Fine
1
Poor
2
11/24/2007 1:47:51 PM By Kenplas
Rinse & Drying
The clean flakes are rinsed in water in order to obtain a neutral pH value, and dried to the required residual moisture.

Fine
8
Poor
4
11/24/2007 1:47:30 PM By Kenplas
Centrifuge & Metal Removal
Remaining film and polyester dust are separated from the flakes.
Remaining metals are separated.
An electro-optical particle separation unit separates remaining foreign plastic bodies (mostly PVC) and undesired color flakes.

Aluminum should be controlled to less than 50PPM. 5PPM may be achieved by metal detector (PET flakes)

Fine
2
Poor
11/24/2007 1:46:59 PM By Kenplas
Hot Water & Alkaline Washing
The flakes are heated to the temperature of the hot washing step, then thoroughly washed (intensive washing) in hot water, caustic soda and detergents(named suds); glues are dissolved.
Materials heavier than polyester (glass, stones, metals) are separated in the bulk material cyclone.

Fine
5
Poor
1
11/24/2007 1:44:51 PM By Kenplas
Centrifuge PET Fines Sorting
Centrifuge
Reference waste ratio: 1.0%

Air separation floating material, Granular and film PE/PP are separated.

Fine
5
Poor
11/24/2007 1:42:46 PM By Kenplas
Hydrocyclone Olefin Sorting

to remove cap, cap ring, handles, base cups, and etc by Hydrocyclone.
Reference waste ratio: 3.0%

In the water bath or with a hydrocyclone a light fraction (mostly polyolefines) is separated from the heavy fraction (mostly polyesters).
The polyester fraction & the polyolefine is pre-dried.

Result of hydrocyclone is much better than floatation tank.

Fine
10
Poor
1
11/24/2007 1:36:03 PM By Kenplas
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.