Visitor No.5843061 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Injection Molding (Machine) ==> plastic injection machinery factory
<< Previous Topic Next Topic >>
1
I would like to know about injection molding machine business in African country,because I like to make company.also I study plastic technology in Malaysia (university technology Malaysia) UTM.about Machine I can buy from Japan.and how about material easy to get in market?
Sincerely
Mr.Nasri

Fine
Poor
1
3/14/2012 12:15:31 PM By badreldin
Very good post, I was really searching for this topic, as I wanted this topic to understand completely and it is also very rare in internet, that is why it was very difficult to understand.

Thank you for sharing this.

regards:

Pet preform suppliers

Fine
Poor
1
7/30/2011 10:25:25 AM By Pet preform suppliers
please send me quote on any used or new pet machine along side with water filling ,capping and labeling at reasable price ???as soon as you can

Fine
1
Poor
9/9/2007 10:53:08 AM By ali abdulla
pls send me the quotation and specification of crasher/granulator asap

regards,
paizal

Fine
Poor
11/15/2006 3:41:16 PM By paizal
pls send us prices of the fallowing machines
crasher/granulator,Dehumidifier,plastic injection machine
Hassan

Fine
Poor
3/10/2006 11:15:31 AM By Hassan
I am having problem in understanding the instruction on the 350T Mitsubishi machine because its written in japanese and chinese. Wousl someone be really kin an dhelp me in this matter?

Not sure if this is the correct channel to go through. Do tell me which channel i have to go to get this information too.

Thanks!!!!!

Fine
1
Poor
3/8/2006 3:25:30 PM By icey
hello. my dear.i want to purchase a some producting machinery like preform machine producting for mineral water . the capacity of bottle preform to be about 1.5 liter .i want to see differnt the machinery for producting 1.5 lit preform bottles and so price .would you mind.waiting for reply. thanks for reply
.

Fine
Poor
1/4/2006 8:00:12 PM By ali
We are small business group. where we like entry to PET-Perform field.
So that we need some buy offers of PET machines.
Where buy offers include price and specification every machine and price every accessories like dryer ciller dehumidifier.
You can send reply by:

muaadomar@hotmail.com

Fine
Poor
10/20/2005 6:00:42 AM By Muaad
want to know the injection control for stretch blowing maching using plc

Fine
1
Poor
2
10/7/2005 10:46:38 AM By mweseng
want to blow buckets

Fine
1
Poor
10/4/2005 8:29:36 PM By Lowings
Dear Messer’s,
Good Morning

We receive your name and address from Google Search.
We are one of leading Importer & Exporter Company here in my area.
We want to need Injection molding machines.

Our mould of Piece Weight is 700gm and 350gm in material PP.
We use PP and ABS material for these machines.
In future we use these machine Acrylic and AS and Nylon material also.

Please tell me mould opening space and Tai Bars Sizes with all specification and CIF price Karachi Pakistan.

We hopeful you will must show your feasible attitude to proceed further in the matter.

Your favorable response will highly be appreciated.
We hope to establish good collaboration with you.
We hope that we shall receive your kind comments in very soon.

You’re truly
Muhammad Nadeem

We hope you will send us better response as soon as possible.
We hope to establish good collaboration with you.
Waiting your valuable response

Thanking you in anticipation.
Yours Sincerely,

Muhammad Nadeem


Thank you for your excellent service.

We look forward to doing business with you for years to come.

Fine
Poor
3
10/2/2005 10:42:21 PM By sabaahtali
how to set back pressure in your kp12 machine

==> Via "back pressure valve" installed on valve board under injection unit.

Fine
1
Poor
9/29/2005 8:33:15 PM By ramana
Please send me a quote for the following item:
1-preform pet making machine .total capacity 12000(1.5L)bph for carbonated beverage.
2-preform pet making machine .total capacity 12000(1.5L)bph for hot filling (88.8 centigrad)
Your prompt reply is appreciated.
Thank you.
m.naser

Fine
2
Poor
6/28/2005 12:57:54 AM By Masalehgoo
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.