Visitor No.5929809 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Blow Molding (Machine) ==> Extrusion Blow Molding
<< Previous Topic Next Topic >>
1
Mike, I know it has been a while since you posted this problem, but did you ever receive any information from Uniloy or solve your problem?

We do have a former Uniloy engineer working for us and has over 20 years formerly with Liberty and Uniloy. I also know a good independent service person.

Fine
Poor
7/20/2006 12:58:38 AM By Todd Renner
We did...

Fine
Poor
2/15/2006 10:18:56 AM By Mike
Mike, why not ask Uniloy? :)

Fine
Poor
2/14/2006 2:43:50 PM By Stanislav Zabelin
I am having a problem with a 6 head Uniloy Blow mold. The Bottoms on 2 molds (1 gallon milk bottle) get holes. Paracin sticks to head. I checked top seals for air leak. They are ok. Ran head temps from 330F to 360F. Still same. Cleaned head and even saoped it. Nada. Went back and forth with Charge pressure between 0 to 100. Nitrogen tanks topped off.
Tried different speeds even. Stripper plate speed is fast anough to go up and down before shot. Stripper plate is Not touching head. I am running out of ideas. Please help... thanks

Fine
2
Poor
2/11/2006 5:02:21 AM By Mike
Hey guys do u know any website i could get reliable information explaining extrusion blow molding

Fine
Poor
2
11/15/2005 11:47:31 AM By Jermaine
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.