Visitor No.5974373 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Blow Molding (Machine) ==> PC bottles
<< Previous Topic Next Topic >>
1
sir,i would like to know petg and polycarbonate data sheet and processing conditions for extrusion blow moulding of baby feeding bottles

Fine
2
Poor
1
1/15/2009 12:48:34 AM By hitesh
This PC bottles always Bottom very light while processing with single stage blow molding. But I tuned a lot of setting in our microprocessor machine including different setting of Oil temp. Without touch preform design, what is the other solution?

Fine
9
Poor
11
10/13/2005 7:49:40 PM By sundharlal
1
 
 

Post A Reply

Temporarily shut down, no new message, sorry.

Name:

Email:

Message:

(Max. 2KB)



Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.