Visitor No.5894549 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
 
Kenplas Forum ==> Injection Mold
1
TopicRepliesViewsLast Update
Valve Gated Parison Mold Problems 0 671 4/4/2015 7:40:17 PM
Valve Gated Mold Issues 0 704 4/4/2015 7:28:24 PM
cooling water requirement for preform molds 1 1481 2/20/2015 10:32:58 PM
PCO 28mm for water cap 3 3059 11/24/2012 4:15:31 PM
Specifications of all design geometry of Cap Thread 8-425 0 1666 8/6/2012 12:21:22 PM
MOLD DESIGN -- DESIGN OF GATES 1 2595 12/1/2011 3:35:34 PM
ptfe molding 0 1377 8/2/2011 6:58:31 PM
Chemical etching on mould 3 1922 9/9/2010 8:00:47 PM
bottle with hollow Handle 1 1605 6/17/2010 1:16:46 PM
Texture sanblast on logo sidewall APET cup-Thermoforming-pressure forming 1 1914 6/1/2010 10:23:15 PM
MOLD DESIGN -- VENTING 3 2344 4/22/2009 12:38:17 AM
I need a metal thread tap for standard 2 litre PET Soda Bottle threads 0 7911 1/9/2009 11:49:06 PM
Cavity Design 1 1839 6/18/2008 12:54:45 AM
PART DESIGN -- DRAFT 1 2890 6/29/2005 9:05:43 PM
PART DESIGN -- RADII 1 2130 6/29/2005 9:05:03 PM
PART DESIGN - MOLD SHRINKAGE 1 3075 6/29/2005 8:37:18 PM
1
 

Start A New Topic

Temporarily shut down, no new message, sorry.

Name:

Email:
Topic Name:

Message:

(Max.  2KB)

































Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2017 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.